Pego Email   sales@pegotester.com    Made_In_China    Ecer

Product Detail
Share to:
Maximum and Minimum Withdrawal Force Test Gauge AS/NZS3112 
Detail
Description: The withdrawal force test gauges are designed according AS/NZS3112 Figure 2.1(a), and meet the requirement of clause 3.14.8.3 and clause 3.14.8.2 Model: PG- AS/NZS3112 (figure 2.1)

Maximum and Minimum Withdrawal Force Test Gauge AS/NZS3112

1. Introduction

The withdrawal force test gauges are designed according AS/NZS3112 Figure 2.1(a), and meet the requirement of clause 3.14.8.3 and clause 3.14.8.2, includes three-pins maximum withdrawal Force Test Plug (10A/250V) to check the maximum force required when the plug is pulled out of the socket, and single-pin minimum withdrawal force test pin to check the minimum force required for a single- pin plug to be pulled out of the socket. The gauges are made of hardened steel.


2. Parameter

Rated up to and includes (test plug)

10A/250V

Force Applied to test plug

20~50N

Size of test pin

6.2mm*1.58mm

Force applied to test pin

1.5N

Material

Hardened steel


Contact us

PEGO GROUP (HK) COMPANY LIMITED

Address:   Flat/RM803, Chevalier House,45-51 Chatham Road South, Tisim Sha Tsui,Kowloon, Hong Kong

E-MAIL: salesHK@pegotester.com

WEB: http://www.pegotester.com/   

          http://www.electricalsafety-testequipment.com/


PEGO TESTER (JIANGXI)

ADDRESS: No. 429, Yichun South Road ( Happiness Park),   Yuanzhou District, Yichun, Jiangxi, 336000, China

E-MAIL: sales@pegotester.com, service@pegotester.com

TEL: 86-(0)795-3560528   FAX: 4008266163 ext. 29929

CS
 
 

Mobile Website