Electrostatic Discharge Generator
1. Introduction:
ESD simulator (ESD gun) is completely meet the requirements of IEC61000-4-2 and GB/T17626.2. The ESD generator is designed for the assessment of electrical and electronic equipment to withstand ESD performance. Electrostatic discharge generator is widely apply to the fields of industry control equipment, household appliance, chemical electronics,communication electronics,components, auto control equipment and etc.
ESD generator is to simulate electrostatic discharge, it belongs to EMC test according to IEC61000-4-2, there is two test methods: contact discharge and air discharge, the test voltage extends from 0.1KV to 30KV, user can freely choose and define the test grade.
The ESD generator is consisted by ESD generator, ESD gun and two electrodes (cone sharp electrode is for contact discharge, and ball sharp electrode is for air discharge), the parameters of rising time, peak current and current at 30ns and 60ns are strictly meet the requirement of IEC6100-4-2.
EMC Test equipment includes: EMI receiver, ESD generator, surge generator, electrical fast transient generator, voltage dips short interruptions and voltage variatins generator, ring wave generator and etc.
2. Parameters:
Model | ESD-2000Q | ESD-2005Q |
Output voltage | Contact discharge | 0.1－20kV ±3％ | 0.1－30kV ±3％ |
Air discharge | 0.1－20kV ±3％ | 0.1－30kV ±3％ |
Holding time | >5s |
Polarity of output voltage | Positive, negative, positive/negative auto |
Trigger mode | Single,counting,20pps,other |
Discharge interval: | 0.05~99.99s |
Numbers of discharge: | 1~9999 |
Energy storage capacitance: | 150pF ±10％(replaceable) |
Discharge resistor: | 330Ω ±10％（replaceable) |
Waveform of contact discharge | Meet the standards of EN/IEC 61000-4-2，GB/T 17626.2 |
Rising time: | 0.8ns ±25％ |
Environment: | Temperature:15°C－35°C;Humidity:10%－75% |
Power supply: | AC220±10％，50/60Hz，300W |
Dimension: | 260mm(W)×170mm(H)×360mm(D) |
Weight: | About 5kg |
