IPX3 and IPX4 Rain Spray Waterproof Test chamber with Oscillating Tube R200 to R1600

1. Introduction:

IPX3-4 Rain Spray Waterproof Testing Equipment with Oscillating Tube R200 to R1600 is designed according to IEC60529 clause 14.2.3 and 14.2.4. It is applied to simulate the electronics, luminaire, electric components and auto parts under the conditions of spraying water and splashing water, and then to check if they can meet the requirements.

The oscillating tube’s radius from R200 to R1600, the aperture of nozzles is 0.4mm, the sample can be over 50KG, and the turntable is no perforated.

IPX3 water Sprayproof Testing Equipment request water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect. Test duration: 10 minutes, volume: 0.7 L/ minute per hole.

IPX4 water splashproof Testing Equipment request water splashing against the enclosure from any direction shall have no harmful effect. Test duration: 10 minutes, volume: 10 L/ minute.

2. Features:

● For IPX3 and IPX4 testing

● The shell of the equipment and turntable are made by SUS304# stainless steel, to ensure rustless.

● Adopts double box-type structure and buit-in water tank, the water can be recycled.

● Equip with adjustable trundles, makes the equipment easy to move.

● Oscillating tube drive: Adopts Panasonic serve motor, with features of low noise and high accuracy.

● Turntable drive: adopts Chinese branded step motor, can adjust the speed and angle by touch screen, and auto control the directions (fit for the samples to do live test).

● Time setting for power: power off: 0-999min-power on: 0-999min-power off: 0-999min

● Control components: 7 inch touch screen+ Panasonic PLC.

3. Specification: