IEC / UL 60335-2-24 Test Solutions for Refrigerating Appliances, Ice Cream Appliance and Ice-marker

Issuing time:2025-05-12 11:13Author:Pego ElectronicsSource:Pego Electronics

IEC 60335-2-24 is a standard on the safety of household and similar electrical appliances issued by the International Electrotechnical Commission (IEC). It is a sub-standard of IEC 60335-1 (General safety standard for household electrical appliances) and specifically targets equipment such as refrigerating appliances, ice cream machines, and ice makers.


UL 60335-2-24 is formulated by Underwriters Laboratories (UL) in the United States and is mainly applicable to the North American region. Although it also has some influence in other regions, it has the highest recognition in the North American market. UL 60335-2-24 partially adopts some contents of IEC 60335-2-24, but at the same time, it retains some national differences and special requirements in the United States.


The following are the testing equipment involved in these two standards.


EN / IEC60335-2-24:2020 Clauses and figuresCorresponding testing equipment from Pego
Clause 11 heating
11.2 replacement test corner
multiplex temperature meter
Clause 15 moisture resistance
15.2 additionSpillage test apparatus (subclause 15.101.1 & figure 101)
Clause 16 leakage current and electric strengthWithstand voltage tester
Clause 21 mechanical strength
21.1 modification1J spring hammer for testing accessible glass panels
Hardwood surface for drop impact test (subclause 21.101)
Vibration tester (subclause 21.101)
φ75mm test sphere (subclause 21.102)
22 constructionScratch tool (Subclause 22.107.2 & figure 102)
Test punch (subclause 22.116 a), b))
5J pendulum hammer (subclause 22.116 c))
Clasue 23 internal wiring
23.3 modificationpower cord flexing test apparatus


UL60335-2-24:2020 Clauses and figuresCorresponding testing equipment from Pego
Clause 11 Heating
11.2 replacement

test corner

Multiplex temperature tester

Clause 20 Stability and mechanical hazards
20.1 modificationArticulated Probes (Annex 101)
21 Mechanical strengthHardwood surface for drop impact test(subclause 21.101)
Vibration tester (subclause 21.101)
φ75mm test sphere (subclause 21.102)
Clause 22 ConstructionScratch Test Pin (subclause 22.107.2 & figure 102)
Test punch for testing glass (subclause 22.116)
5J pendulum hammer for testing accessible glass panels (subclause 22.116)
Test probe B with 20N thruster (subclause 22.118 DV1.2)
Clause 31 Resistance to rustingScratch tester with hardened steel pin (subclause 31.101 DV.1 )
Salt spray test chamber (subclause 31.101 DV.1 )
Figures
Figure 102 - Detail of scratching tool tipscratching tool tip
Figure 101. DVA.1 - Articulate probe with flat and cone shaped hand 3.5-4.5 year ageArticulated Probes   
Figure 101. DVA.2 - Articulate probe with flat and cone shaped hand 10.5-11.5 year ageArticulated Probes   



Contact us

PEGO ELECTRONICS (YI CHUN) CO., LTD.

ADDRESS: No. 429, Yichun South Road ( Happiness Park),   Yuanzhou District, Yichun, Jiangxi, 336000, China

E-MAIL: sales@pegotester.com, salesHK@pegotester.com

              service@pegotester.com

WEB: https://www.pegotester.com h‍ttps://www.pegotesters.com

TEL: 86-(0)795-3560528   FAX: 4008266163 ext. 29929

WhatsApp / Wechat: +86-189 7955 4054

CS
 
 
website qrcode

Mobile Website