Product Detail
Share to:
Blankets Mechanical Strength Test Apparatus 
Detail
Description: The blankets mechanical strength test apparatus is designed according to IEC60335-2-17 clause 21.102 and Annex BB.1 to BB.3. Model: PG-BMS

Blankets Mechanical Strength test Apparatus

1. Introduction:

The blankets mechanical strength test apparatus is designed according to IEC60335-2-17 clause 21.102 and Annex BB.1 to BB.3. It’s used for mechanical strength test by simulating the actual use of the blanket. Pulling the blanket by the driving bar, the driving sprocket operating at a speed of 33r/min. Rotated the blanket 1000 times with an end attached to the driving bar and then turned through 90° and rotated another 1000 times.


2. Parameters:

Control method

button control+meter

Maximum size of blanket under test

2100*2000mm

Lifting device

Double sprocket cylinder lifts

Driving sprocket speed

33rpm/min

Hardwood cylindrical

Ø65mm*140mm(L)

Force of cylindrical on drum

5.1N

Size of rotating drum

Ø160*2000mm

Rubber spheres

R30mm, hardness: 40-50 HR

Horizontal angle of arms

25°

Square bar

25*25*2000mm

Weight of blanket

6kg/m or total mass 6.5kg

Test time

0-9999 (settable) normally 1000 times

Diameter of sprocket

230mm

Power supply

AC 220V/50Hz

Dimension

2500*800*2500mm (L*D*H)

Contact us

PEGO GROUP (HK) COMPANY LIMITED

Address:   Flat/RM803, Chevalier House,45-51 Chatham Road South, Tisim Sha Tsui,Kowloon, Hong Kong

E-MAIL: salesHK@pegotester.com

WEB: http://www.pegotester.com/   

          http://www.electricalsafety-testequipment.com/


PEGO ELECTRONICS (YI CHUN) CO., LTD.

ADDRESS: No. 429, Yichun South Road ( Happiness Park),   Yuanzhou District, Yichun, Jiangxi, 336000, China

E-MAIL: sales@pegotester.com, service@pegotester.com

TEL: 86-(0)795-3560528   FAX: 4008266163 ext. 29929

CS
 
 
website qrcode

Mobile Website