How to Assemble the Draught-Proof Enclosure?

Issuing time:2020-07-14 16:38Author:PEGO GROUPSource:PEGO GROUP

Draught-proof enclosure is designed according to IEC60598.1 annex D, it is applied to thermal test of luminaire under the conditions of normal operation and abnormal operation. The draught-proof enclosure is rectangular, with a double skin on top and on at least three side, and with a solid base. The double skins are of perforated metal, spaced approximately 150mm apart, with regular perforations of 1mm to 2mm diameter, occupying about 40% of the whole area of each skin. At the top of enclosure shall mounted a ceiling plate or a dismountable hanging bracket with a hook to fix the luminaire at the ceiling. At the bottom of side of enclosure shall install inlet hole for the purpose of wire connection. For the sake of install luminaire, the enclosure equip with a sample holder, as per the standard, 2-layer black solid-board is applied to fix the luminaire under test.


Please see the assembly instruction of draught-proof enclosure:   https://youtu.be/ENO7hZHlmAs


Contact us

PEGO GROUP (HK) COMPANY LIMITED

Address:   Flat/RM803, Chevalier House,45-51 Chatham Road South, Tisim Sha Tsui,Kowloon, Hong Kong

E-MAIL: salesHK@pegotester.com

WEB: http://www.pegotester.com/   

          http://www.electricalsafety-testequipment.com/


PEGO ELECTRONICS (YI CHUN) CO., LTD.

ADDRESS: No. 429, Yichun South Road ( Happiness Park),   Yuanzhou District, Yichun, Jiangxi, 336000, China

E-MAIL: sales@pegotester.com, service@pegotester.com

TEL: 86-(0)795-3560528   FAX: 4008266163 ext. 29929

CS
 
 
website qrcode

Mobile Website