In-depth Analysis of Pego Non-Solid Pin Test Apparatus

Issuing time:2025-01-20 15:06Author:Pego Electronics

In the realm of electrical safety, guaranteeing the quality and safety of electrical connection components like plugs and sockets, appliance inlets and plug connectors is of utmost importance. This paper centers on the Pego non-solid pin test apparatus, a pivotal testing apparatus employed to evaluate the hardness, strength, wear resistance, and other mechanical properties of non-solid pins. The article comprehensively covers the device's technical specifications, operating principle, practical applications, testing procedures, and more. This in - depth exploration aims to provide a thorough understanding of the Pego non-solid pin test device and its significance in ensuring the reliability of electrical connection components.



1. Basic Specification to Pego Non - Solid Pin Test Apparatus

The Non-Solid Pin Test Apparatus is designed to assess the mechanical strength of plugs, as well as appliance inlets and plug connectors. It is meticulously crafted in strict accordance with the IEC60884 - 1 and IEC60320 - 1 standards. This ensures that the testing results are accurate, reliable, and compliant with international industry benchmarks. Its application helps manufacturers and quality control teams determine whether these electrical components can withstand the mechanical stresses they may encounter during normal use and handling, thus guaranteeing the safety and durability of electrical products.


Specification:

Steel rod

Φ4.8mm

Weights

100N

Usage

Manually rotate the hand wheel to make the pin bearing pressure, the test time is 1 min

Reference standards

IEC60320-1 figure 2, IEC60884-1 figure 14


non-solid-pin-test-device.jpg

2. Main Structure and Composition

The non-solid pin testing machine is ingeniously designed. Its core component consists of a steel rod with an exact diameter of 4.8mm, which is the key element for force application. The loading system is composed of a weight that provides a stable pressure of 100N. This weight can precisely transfer the pressure to the steel rod and then act on the non - solid pin in a direction perpendicular to the axis of the pin. Meanwhile, the non-slid pin tester is equipped with a stable support structure to fix the pin. This ensures the accuracy of the pin's position during the test and makes the force application more standardized.

   non-solid-pin-test.jpg


3. Working Principle of the Non-Solid Pin Test Equipment

The non-solid pin test equipment is designed in strict accordance with standard dimensions. It operates by using a 100N load weight to exert pressure. A steel rod with a diameter of Φ4.8mm is pressed perpendicularly to the axis of the non - solid pin for a duration of 1 minute. This standardized application of force allows for accurate assessment of the non - solid pin's mechanical properties under specific stress conditions.


4. Simple Procedure:

The test process is rigorous and orderly. First, firmly mount the non - solid pin on the supporting structure, ensuring its axis is perpendicular to the steel rod for accurate results. Then, place a 100N - mass - equipped steel rod in contact with the test pin's surface and hold it steady for 1 minute. Closely observe and record the pin's pressure - point deformation during this time. Finally, after the pressure is applied, use a measuring tool to carefully measure the pin's dimensional changes in all directions. Judge the pin's compliance with the standard: if the pressure - point deformation exceeds 0.15mm or any dimensional change exceeds 0.06mm, the pin is non - compliant.



5. Importance:

Non-solid pins are widely used in various plugs, sockets and electrical connection parts. In daily life and industrial production, these pins are subjected to various mechanical stresses and electrical loads. If the quality of the pins is not up to standard, they may become loose, deformed or even broken, which may cause electrical accidents such as short circuits and fires. The non-solid pin test device is designed to ensure that the quality and performance of non-solid pins meet the standard requirements. Through strict testing of the pins, potential problems can be discovered in time, unqualified products can be prevented from entering the market, and the safe operation of the electrical system can be guaranteed from the source.


In short, the non-solid pin test device plays a vital role in ensuring electrical safety. Through continuous technological innovation and development, it will provide a stronger guarantee for the safe and stable development of the electrical industry. We should also pay more attention to electrical safety, pay attention to the development and application of test devices, and jointly create a safe and reliable electrical environment.


Contact us

PEGO ELECTRONICS (YI CHUN) CO., LTD.

ADDRESS: No. 429, Yichun South Road ( Happiness Park),   Yuanzhou District, Yichun, Jiangxi, 336000, China

E-MAIL: sales@pegotester.com, salesHK@pegotester.com

              service@pegotester.com

WEB: https://www.pegotester.com h‍ttps://www.pegotesters.com

TEL: 86-(0)795-3560528   FAX: 4008266163 ext. 29929

CS
 
 
website qrcode

Mobile Website