E26 Lampcap "Go" and "Not Go" Gauges
Designed according to IEC60061-3:2004, third-lab certification authorized by CNAS on request.
● 7006-27D-3:“Go” Gauge for Caps E26, E26/50*39 and E26d
● 7006-29L-4:“Not Go” Gauge for Caps E26, E26/50*39, E26/51*39 and E26d
● 7006-29A-2: Gauge for Caps E26d on Finished Lamps for Testing Protection Against Accidental Contact
● 7006-29-3: Gauge for Testing Contact-Making of Lamps Fitted with Caps E26, E26/50*39, E26/51*39
● 7006-29C-2: Gauge with Reference Diameter of 13.2mm for Caps E26d
● 7006-29A-2: Gauge for Caps E26d on Finished Lamps for Testing Protection Against Accidental Contact
About the Test Gauges:
1. Lamp cap and Lampholder Gauges are designed according to IEC60061-3, it is also be called to go / no go gauge.
2. The structure and sharp (like thread waveform) of gauges for lamp cap and lampholder are calculated and optimized by computer, and then process by computer machine to reach high precision and nice-looking.
3. The lamp cap and lampholder gauges (go no go gauge) is made by high-hardness alloy, and handle with QPQ composite infiltration which greatly improved the abilities of rust prevention and wear resistance, the rockwell hardness can reach HR580 above, the service life is more than 3-5 times longer than ordinary gauges.
4. The Lamp cap and Lampholder gauges can pass the calibration of the third-party institute, and get the calibration certificate.
