Product Detail
Share to:

IEC61000-4-5 6KV 1.2/50µs, 8/20 µs Lightning Surge Generator

 
Detail
Description Surge Generator is designed according to IEC61000-4-5 and GB/T17626.5,and completely meet the requirements of the standards. Model LSG-6K10

6KV Combination Wave Lightning Surge Generator

1. Introduction:

The combination wave lightning surge generator is designed according to IEC61000-4-5 and GB/T17626.5, and completely meet the test requirements of the standards. It is widely used in the fields of industry control equipment, house-holding appliance,medical electronics, communications electronics,components, auto control equipment and etc..

Lightning surge generator is to simulate the surge voltage caused by switching transient and lightning transient, the surge immunity test is a destructive test to found out the surge voltage effect to EUT in normal working condition. This equipment can generate an open-circuit voltage surge 1.2/50μs and an open-circuit current surge 8/20μs. The effective output impedance is 2ohm. The surge is applied to the AC or DC supply lines of the EUT. The test voltage can be customized, user can choose and define the test levels. The voltage and current of coupling and decoupling network can be customized, and CDN can be built-in the surge generator.


2. Parameters:

Output voltage (open circuit)

6kV (Max) ±5%

Front time

1.2μs ±30%

Time to half-value

50μs ±20%

Output current (short circuit)

3kA±5% (max)

Front time

8μs ±20%

Time to half-value

20μs ±20%

Output polarity

Positive, negative, positive/negative automatically

Output impedance

, 1

Trigger mode

Synchronization, asynchronization

Inject phase

Freely set at 0360°, resolution:1°

Trigger mode

Auto or manual, single

Surge times

1-9999 times

Memories

1000 groups

Surge interval

20-9999s

Accuracy

5%

Capacity of built-in CDN

ACsingle phase 300V, 10A16AMax, 50/60Hz

DC300V, 10A16AMax

EUT power supply

AC110-220V±10%, 50/60Hz

Coupling mode

L-N, L-PE, N-PE, L+N-PE

Built-in network coupling components

Line to line

18μF capacitor

Line to ground

10Ω resistor + 9μF capacitor

Working environment

Temperature:15°C35°C humidity:0%75%

Power supply

AC220±10%, 50/60Hz

dimension

470mm(W)×260mm(H)×500mm(D)

Weight

About 30kg


3. Waveform

Contact us

PEGO ELECTRONICS (YI CHUN) CO., LTD.

ADDRESS: No. 429, Yichun South Road ( Happiness Park),   Yuanzhou District, Yichun, Jiangxi, 336000, China

E-MAIL: sales@pegotester.com, salesHK@pegotester.com

              service@pegotester.com

WEB: https://www.pegotester.com h‍ttps://www.pegotesters.com

TEL: 86-(0)795-3560528   FAX: 4008266163 ext. 29929

CS
 
 
website qrcode

Mobile Website