Luminaire Suspending Test Device
1. Introduction
The luminaire suspending test device is for the load performance test of all suspended luminaire and assesses the deformation of components of the suspension system as per IEC60598-1 clause 4.14.1 (test A).
A constant evenly distributed load equal to four times the weight of luminaire shall be added to luminaire in the normal direction of the load for a period of 1h. There shall be no appreciable deformation of the components of the suspension system at the end of this period.
2. Parameter
Control mode | 1). Manual control 2). Adjustable upper and down, maximum height: 800mm |
Test station | 1 |
Test load | Load equal to 4 times weight of luminaire |
Test weight | 50KG |
Test time | 1 hour (user prepare the timer) |
Column size | φ80mm*1500mm |
Base plate | 1). steel countertop: 800mm*800mm*10mm 2). Fangtong load-bearing bracket: 40mm*40mm 3). All-directions casters with brake |
Fixture | Adjustable installation and tightening methods, can fit with most of suspended luminaire |
Suspended Lateral arm | Equip with adjusting sliding sleeve and positioning pin, the height can be adjusted freely. |
Dimension | 800mm*800mm*1400mm (L*D*H) |