Category
Product Detail
Share to:

Step-in Dust Chamber

 
Detail
Description Dustproof test chamber is designed according to IEC60529 for IP5X&IP6X tests and IEC60068-2-68 method La2 (constant air pressure) Model FC56-8000L

Step-in Dust Chamber

1. Introduction

Dustproof test chamber is designed according to IEC60529 for IP5X&IP6X tests and IEC60068-2-68 method La2 (constant air pressure), the object of this test is to determine the degree of protection against ingress of fine dust into electrotechnical products, like outdoor luminaire, household appliance, auto parts and other similar electrical products.

This is a dust tightness test in which the specimen is exposed to a heavily dust-laden air flow containing non-abrasive powder of particle size <75μm, and checking the the physical and other relevant properties of the product to provide the basis for product design, improvement and verification. The test does not simulate natural or induced environments, a vertical downwards air flow is specified for the test. Enclosures of a specified category are tested with the internal air pressure lower than the surrounding atmospheric air pressure in order to encourage the ingress of powder, the specified quantity of powder ensures that the dust concentration is extremely high and uniform. Thus, this test chamber is equipped with a dust blower device for exciting and blowing the dust into the sealed test chamber. According to the agreement and relevant regulations, the vacuum device is an optional device for IP5X test, and for IP6X and La2 testing, the test sample should be connected to a vacuum pump to pump the air inside, so that the air flow in the dust chamber can enter the sample through gaps, bushings or other similar parts; the pressure pipeline is provided with a regulating valve, a monitoring vacuum pressure gauge and a gas flow meter to measures the pumping rate. The dust falls settled at the bottom of the test box is recycled. In order to prevent the dust from adhering to the inner wall of the chamber and reduce the dust concentration, the bottom of the box is set in a funnel shape and equipped with a dust shaking device, which is convenient for dust recovery, the dust shaking cycle and the time is controlled by the central controller.


3. Specification

Model

PG-FC56-8000L

Working dimension

L2000mm*D2000mm*H2000mm

Outer dimension

L2650mm*D2250mm*H2700mm

Working power

AC 380V±10%, 50Hz±10%, 11KW

(3phases 5wires, live wire+neutral wire+earth)

Temperature range

RT~+40℃

Temperature evenness

≤2℃

Temperature fluctuation

≤±0.5℃

wire diameter and interval of metal net

50μm/75μm

Airflow velocity

≤ 2m/s

quantity of powder

2-4kg/m3 (Circulating dust)

Dust falling way

Free fall

Dust dehumidification

Electric heating dehumidification

Dust blowing cycle

Periodic or continuous

Blowing time

1S~999H (adjustable)

Vibration time

1S~999H (adjustable)

Sand and dust

Dry talcum powder

Working conditions

Temperature:15℃~35℃,

humidity:≤85%R.H.

Pressure: 86kPa-106kPa

Control system

PLC+touch screen

a. Control panel: set the power ON/OFF, E-stop button, vacuum pressure gauge, Exhaust flow meter

b. Touch screen can set up blowing time/test time/periodic or continuous blowing cycle/test temperature

c. English operation interface


Contact us

PEGO ELECTRONICS (YI CHUN) CO., LTD.

ADDRESS: No. 429, Yichun South Road ( Happiness Park),   Yuanzhou District, Yichun, Jiangxi, 336000, China

E-MAIL: sales@pegotester.com, salesHK@pegotester.com

              service@pegotester.com

WEB: https://www.pegotester.com h‍ttps://www.pegotesters.com

TEL: 86-(0)795-3560528   FAX: 4008266163 ext. 29929

CS
 
 
website qrcode

Mobile Website