Test Probe D for IP4X testing (Test wire ： Φ1.0 wire-length 100 ）
1. Introduction:
Test probe D (Test wire) Designed according to IEC61032 figure 4, meet the requirements of IEC60529-IP3，IEC60065，IEC60598 and etc.
Test probe D is for IP4X testing, it means for the protection against solid foreign objects of Φ1.0mm and greater.
Test probe D with 1N force is for IP4X testing, it means for the protection of person’s wire from hazard parts.
2. Specification
Length of test wire: | 100mm | Diameter of test wire: | 1mm |
Diameter of stop sphere: | 35mm | Diameter of handle: | 10mm |
Length of handle: | 100mm | Thruster (optional) | 1N |
Material: Insulation material (handle, stop sphere), metal (test wire) |
3. IP code Test Probe Kits:
Test Probe A for IP10 Testing: Φ50 sphere with handle
Test Probe B for IP20 Testing: jointed test finger
Test probe C for IP30 Testing: Φ2.5 rod-length 100
Test Probe D for IP40 Testing: Φ1.0 wire-length 100
Test Probe 1 for IP10 Testing: 500g steel sphere
Test Probe 2 for IP20 Testing: 15g steel sphere
